Homeowner:
At most we use our lawn mower twice a week, but when we are ready to cut the lawn we want our equipment ready too. A one-time MIL engine treatment will make it run smoother, start easier and last longer.

Contractor/Professional:
The biggest difference here is the daily use, the constant push to get to the next job and the weather that constantly is pushing you behind. There may also be the lack of maintenance by employees, because they know you have more money than you know what to do with.  We recommend you use the CL100 product line, built for high endurance.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your mowers will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Homeowner:
We recommend the use of our Microlon 4oz.MIL Fuel Treatment product. We would start by adding two ounces directly into the blowers fuel tank and fill the rest with your next fill up.  That’s it for the life on the mower.  It will run smoother, start easier and last longer.  If this is an older model you will have to clean the air breather/filter as the cleaner will have deposited the old varnish and sludge build up that was in the engine.

Contractor/Professional:
As in most lawn care equipment we recommend you treat this product with our CL-100 product.  It was designed for endurance and the heavy workloads the job requires.  Remember to clean all breather and filters after 2nd treatment.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your blowers will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Homeowner:
At most we use our edger twice a week, but when we are ready to cut the lawn we want our equipment ready too. A one-time MIL engine treatment will make it run smoother, start easier and last longer.

Contractor/Professional:
The biggest difference here is the daily use, the constant push to get to the next job and the weather that constantly is pushing you behind. There may also be the lack of maintenance by employees, because they know you have more money than you know what to do with.  We recommend you use the CL100 product line, built for high endurance.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your Edger will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Homeowner:
We recommend the use of our Microlon 4oz.MIL Fuel Treatment product. We would start by adding two ounces directly into the line trimmers fuel tank and fill the rest with your next fill up.  That’s it for the life on the trimmer.  It will run smoother, start easier and last longer.  If this is an older model you will have to clean the air breather/filter as the cleaner will have deposited the old varnish and sludge build up that was in the engine.

Contractor/Professional:
As in most lawn care equipment we recommend you treat this product with our CL-100 product.  It was designed for endurance and the heavy workloads the job requires.  Remember to clean all breather and filters after 2nd treatment.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your blowers will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Homeowner:
We recommend the use of our Microlon 4oz.MIL Fuel Treatment product. We would start by adding two ounces directly into the line trimmers fuel tank and fill the rest with your next fill up.  That’s it for the life on the trimmer.  It will run smoother, start easier and last longer.  If this is an older model you will have to clean the air breather/filter as the cleaner will have deposited the old varnish and sludge build up that was in the engine.

Contractor/Professional:
As in most lawn care equipment we recommend you treat this product with our CL-100 product.  It was designed for endurance and the heavy workloads the job requires.  Remember to clean all breather and filters after 2nd treatment.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your blowers will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Homeowner:
We recommend the use of our Microlon 4oz.MIL Fuel Treatment product. We would start by adding two ounces directly into the line trimmers fuel tank and fill the rest with your next fill up.  That’s it for the life on the trimmer.  It will run smoother, start easier and last longer.  If this is an older model you will have to clean the air breather/filter as the cleaner will have deposited the old varnish and sludge build up that was in the engine.

Contractor/Professional:
As in most lawn care equipment we recommend you treat this product with our CL-100 product.  It was designed for endurance and the heavy workloads the job requires.  Remember to clean all breather and filters after 2nd treatment.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your blowers will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Homeowner:
At most we use our air compressor a couple times a week, but when we are ready to use them we want our equipment to be ready too. A one-time MIL engine treatment will make it run smoother, start easier and last longer.

Contractor/Professional:
The biggest difference here is the daily use, the constant push to get to the next job and the weather that constantly is pushing you behind. There may also be the lack of maintenance by employees, because they know you have more money than you know what to do with.  We recommend you use the CL100 product line, built for high endurance.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your mowers will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Homeowner:
At most we use our generator a few times a year, but when we are ready to use it we want our equipment to be ready too.  A one-time MIL engine treatment will make it run smoother, start easier and last longer.

Contractor/Professional:
The biggest difference here is the daily use, the constant push to get to the next job and the weather that constantly is pushing you behind. There may also be the lack of maintenance by employees, because they know you have more money than you know what to do with.  We recommend you use the CL100 product line, built for high endurance.  Time and neglect has varnished and carbonized the engine.  CL100 has a cleaner that does it’s work first and then the micro resin is deposited into the steel of the engine.  Your mowers will last longer and keep running. Please remember Microlon does not fix mechanical problems, so your units need to be in good running order before treatment or you are throwing your money away.  This is a one-time treatment you will never do it again.

Fun is what these are all about. We don’t get to use them all the time so when we are ready to play our toys should be too.  A one-time MIL engine treatment will make it run smoother, start easier, last longer and give you more horsepower.  Depending on the type of engine your machine has (2 cycle or 4 stroke) will determine which type of kit you would need.

A one-time MIL engine treatment will make your engien run smoother, start easier, last longer and give you more horsepower.  Depending on the type of engine you machine has (2 cycle or 4 stroke) will determine which type of kit you would need.