Cable Guard – apply light coat of UltraBlue from your 3 cc syringe. Your bow will draw smoother, quieter and easier.

Wheels and Cams: Apply a drop of the Microlon resin from the Oiler at the axle/wheel bearings

Flight Deck: Apply a drop on each side of the flight deck in front of and behind the bowstring. Spread lubricant the length of the deck. Apply after every 200 shots.

Wheels and Cams: Apply a drop at the axle/wheel bearings.

Trigger: Apply a drop to the front and back of trigger stem inside the hole in the stock where the stem protrudes. Apply a drop on each side of the string latch through the string slot in the trigger housing.

Dry Fire Inhibitor: Apply a drop to each side of the DFI pivot point.

Safety Slide: Apply a drop to the plunger shaft on Roller Touch and Drop Latch Triggers. Apply a drop inside the safety slide cutout on each side of the Power Touch trigger housing.

General Use: Use sparingly. Remove excess with a clean cloth. Coat screw and bolt heads at the beginning and end of the season and after exposure to rain.

The above instructions were written by the boys at Ten Point Crossbow Technologies. You can visit their site and purchase direct with you other bow accessories or purchase here. Visit www.tenpointcrossbows.com. Also click here to read Don "Duckman" Williams comments on our oilers. Don is the 2005 and 2006 IBO National Champion and the 2006 World Champion Crossbow Division.

Kit contains:
(1) Black Powder Magic Bore Cleaner (4oz)
(1) UltraBlue® Black Powder Lube (1oz)
(1) Microlon Gun Juice (1oz)
(2) 50 cal swabs

WHAT TO EXPECT:
Reduces friction
Eliminates Short Load Syndrome
Increases velocity
Improves shot groupings
Helps prevent rust and corrosion

SIMPLE INSTRUCTIONS:
Clean barrel with Magic Bore Cleaner, five or six patches should do it, if really dirty it may take more.

Use a hair dryer or heat gun and heat the ID of the barrel. Not hot but warm to the touch should do.

While it is still warm, use one of the furnished 50 cal swabs, shake Gun Juice very well for 30 seconds to suspend settled resin. Pass through the barrel then let the barrel thoroughly dry. Reheat barrel and repeat Gun Juice treatment. Repeat this process four to five times.

While barrel is still warm, with the remaining swab lightly lubricate the barrel with UltraBlue™ Black Powder Penetrating Lube.

Heat the breach plug threads.  Lightly lubricate with UltraBlue lube.

After shooting the barrel, repeat the cleaning as above and apply a light coating of UltraBlue™ Lube.  The Gun juice process is a one-time process and does not need to be repeated.

You should also know and understand that there is no Teflon in our products.  That means there is no build-up or dimensional changes that takes place.  By passing a freshly dipped swab of Gun juice through the barrel you are filling the pores of steel that were not treated in the initial three or four passes.  You will have to re-sight your weapon.  Your point of impact will change.  The velocity will increase.

To help protect rusting, wipe entire exterior of weapon with either Gun Juice or UltraBlue™ and allow it to set a while and wipe clean. Keep away from fine wood.  Click here to read the American Gunsmith article on Gun Juice.

 Fishing ~ UltraBlue® Reel Oiler

The UltraBlue® Fishing Reel Oiler has been specially blended like no other oiler on the market today. The Microlon’s half micron fractured resin is custom blended to high-grade synthetic oil. When applied to any metal-to-metal contact point it starts immediately to work reducing friction and it is not harmful to plastics. The injector tip makes this oiler ideal for getting to those hard to reach places. The Microlon Precision Oiler is inexpensive, portable and easy to use. Always shake Microlon Products well before using.

Apply to Spool Bearings, Roller and Ball Bearings, Steel and Brass Gears, Main and Drive Shafts. Reduces friction, won’t gum up, won’t wash out, helps to resists rust and gives you a penetrating lasting lube like no other.

Microlon Gun Juice

Microlon Gun Juice can be used on all firearms in place of normal gun oil. Gun Juice is far superior to oils in that it provides excellent lubrication and is a "Dry Film" lubricant that will not attract dirt, dust or grit which can permanently damage a firearm. Gun Juice works great on barrels and improves trigger performance. It has an operating range of -100° to 725°.  Click here to read the American Gunsmith article on Gun Juice.
                               

A penetrating gun lube custom blended by Microlon Products to have a lighter viscosity. UltraBlue has a temp range of -100° to +725°. It will help control corrosion and reduce friction. Use after each cleaning.

RIFLES
Lightly coat bolt lugs, firing pins and metal-to-metal surfaces.

When lubing any weapon, remove excess with a clean cloth before firing.

Microlon Gun Juice

Microlon Gun Juice can be used on all firearms in place of normal gun oil. Gun Juice is far superior to oils in that it provides excellent lubrication and is a "Dry Film" lubricant that will not attract dirt, dust or grit which can permanently damage a firearm. Gun Juice works great on barrels and improves trigger performance. It has an operating range of   -100° to +725°.  Click here to read the American Gunsmith article on Gun Juice.

A penetrating gun lube custom blended by Microlon Products to have a lighter viscosity. UltraBlue has a temp range of -100° to +725°. It will help control corrosion and reduce friction. Use after each cleaning.

SHOTGUNS
Coat hinge surfaces, choke tubes threads and all metal-to-metal surfaces.

CHOKES
Apply to threads. Screw in and out. Instantly feel the difference. Leave a light coat in ID of choke.  Click here to read comments from Teague Precision Chokes regarding our products.

When lubing any weapon, remove excess with a clean cloth before firing.

Microlon Gun Juice

Microlon Gun Juice can be used on all firearms in place of normal gun oil. Gun Juice is far superior to oils in that it provides excellent lubrication and is a "Dry Film" lubricant that will not attract dirt, dust or grit which can permanently damage a firearm. Gun Juice works great on barrels and improves trigger performance. It has an operating range of  -100° to +725°.  Click here to read the American Gunsmith article on Gun Juice.